Elinchrom RX 1200 Instrukcje Operacyjne Pobierz pdf (Strona 5)

• Keep ash units out of reach whenever possible.

• Switch off when not in use and disconnect ashheads.

• Do not use in restricted areas (like hospitals, etc.)

• Do not use near ammable/explosive material.

• It must be protected from dripping water and from extremely dusty conditions

• The unit must ALWAYS be plugged into an EARTHED electrical socket.

• This equipment should be used only in a dry environment

• If the unit has been exposed to very cold conditions, sudden exposure to warm or humid air may

cause condensation => the unit should acclimate for some time to prevent condensation.

• There is high voltage and can be high currents, so please apply all the usual safety precautions

when handling the unit, changing fuses, modelling lamps etc.

• Do not open the unit. In the event of damage or apparent failure, contact a repair service or any

Elinchrom agent or email: [email protected]

• Always switch off the unit before connecting or disconnecting ashheads

• Check always if ashhead connections are plugged in and locked correctly

Flash Tubes and Modelling lamps

• Flash tubes and modelling lamps in use are very hot!

• Never touch a ash tube or lamp before the unit cooled down and is disconnected from the mains.

• Do not re ashes from short distance (less than 1m) directed to a person and avoid looking

into the ashlight!

• Keep generally distance to operating units.

• Always switch off the unit before connecting or disconnecting ashheads!

• The head connector must always be locked correctly before any use.

• Never store liquids or drinks on the power pack panel or closed to the unit!

• Flash systems store electrical energy in capacitors by applying high voltage.

• For your safety, never open or disassemble your ashes.

• Only an authorised service engineer should open or attempt to repair the units.

• Internal defect charge capacitors may explode whilst the unit is in use, neve

switch on a not proper working ash unit.

Before you start ! User Safety Information

1 2 3 4 5 6 7 8 9 10 ... 15 16

Brak uwag

Elinchrom RX 1200 Instrukcje Operacyjne Strona 5