6
Operating Instructions
The power control provides simultaneous and continuously variable adjustment
of the modelling lamp and the ash power in step of 1/10 f-stop.
The display, provides digital power information, in f-stop from 3.5 to 8.5 for the
"Digital 2400 RX" and 2.5 to 7.5 for the "Digital 1200 RX".
Digital Power Regulation (12 and 13)
The actual ash power is displayed in a f-stop compatible format.
The power range is 6 f-stops. The digital display, provides continuous power
indication of the ash and modelling lamp. The controls cover a continuous
output range from full power 1/1 to 1/32th in 1/10th f-stop steps.
During charging or discharging the display "ashes". In case of overheating
or malfunction, the display shows "ER" for error.
Digital Power Display (14)
On/Off Switch (3)
By pressing this touch button the Digital RX is switched on or off.
This unit is protected by a thermal circuit breaker to avoid overheating. Should this
occur, the unit turns off automatically and cannot be operated! After a break for cooling,
the ash is ready again for operation.
Modelling Lamp Controls (4-16-17)
• Proportional: The modelling lamp will be adjusted automatically in proportion,
when the ash power is set to another value with touch button 12 or 13.
• Free: To set ash- and modelling lamp values individually.
• Modelling Lamp off
Note: There is an additional ON/OFF switch for the modelling lamp at the ashhead!
The ashhead control button A/B must be switched on for the selected ashhead.
Before connecting the digital RX for the rst time, make sure that your mains supply and the rating
set on the equipment (electrical specication plate) are compatible to 110V or 230V.
• Connect lampheads ensuring that lamphead touches (18-19) are Off.
• Connect the mains cord in the inlet socket (1)
• Select charging rate (11) (" " slow position), only when the mains supply is too limited.
• Select modelling lamp setting (4)
• Connect the synchro lead (10)
• Check that the photocell’s switch (6) is in the required position.
• Use the touch buttons (12 - 13) to select the desired power.
• The open ash (5) will light up, indicating that the unit is ready for operation.
Fonctions
(33 strony)
(61 strony)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Komentarze do niniejszej Instrukcji